Contraction - Family of functions

Introduction

In large graphs, like the road graphs, or electric networks, graph contraction can be used to speed up some graph algorithms. Contraction reduces the size of the graph by removing some of the vertices and edges and, for example, might add edges that represent a sequence of original edges decreasing the total time and space used in graph algorithms.

This implementation gives a flexible framework for adding contraction algorithms in the future, currently, it supports two algorithms:

  1. Dead end contraction

  2. Linear contraction

Allowing the user to:

  • Forbid contraction on a set of nodes.

  • Decide the order of the contraction algorithms and set the maximum number of times they are to be executed.

Dead end contraction

Contraction of the leaf nodes of the graph.

Dead end

A node is considered a dead end node when

  • On undirected graphs:

    • The number of adjacent vertices is 1.

  • On directed graphs:

    • The number of adjacent vertices is 1.

    • There are no outgoing edges and has at least one incoming edge.

    • There are no incoming edges and has at least one outgoing edge.

When the conditions are true then the Operation: Dead End Contraction can be done.

Dead end vertex on undirected graph

  • The green nodes are dead end nodes

  • The blue nodes have an unlimited number of edges.

graph G {
    u, v [shape=circle;style=filled;width=.4;color=deepskyblue];
    a, b [style=filled; color=green];
    G [shape=tripleoctagon;width=1.5;style=filled;
       color=deepskyblue;label = "Rest of the Graph"];

    rankdir=LR;
    G -- {u, v} [dir=none, weight=1, penwidth=3];
    u -- a [color=black];
    u -- a [color=darkgray];
    v -- b;
}

Node

Adjecent nodes

Number of adjacent nodes

\(a\)

\(\{u\}\)

1

\(b\)

\(\{v\}\)

1

Dead end vertex on directed graph

  • The green nodes are dead end nodes

  • The blue nodes have an unlimited number of incoming and/or outgoing edges.

digraph G {
    u, v, w, x, y [shape=circle;style=filled;width=.4;color=deepskyblue];
    a, b, c, d, e [style=filled; color=green];
    G [shape=tripleoctagon;width=1.5;style=filled;
       color=deepskyblue;label = "Rest of the Graph"];

    rankdir=LR;
    G -> {u, v, w} [dir=none, weight=1, penwidth=3];
    {x, y} -> G  [dir=none, weight=1, penwidth=3];
    u -> a -> u;
    v -> b;
    {w, v} -> c;
    d -> x;
    e -> {x, y};
}

Node

Adjecent nodes

Number of adjacent nodes

Number of incoming edges

Number of outgoing edges

\(a\)

\(\{u\}\)

1

\(b\)

\(\{v\}\)

1

\(c\)

\(\{v, w\}\)

2

2

0

\(d\)

\(\{x\}\)

1

\(e\)

\(\{x, y\}\)

2

0

2

From above, nodes \(\{a, b, d\}\) are dead ends because the number of adjacent vertices is 1. No further checks are needed for those nodes.

On the following table, nodes \(\{c, e\}\) because the even that the number of adjacent vertices is not 1 for

  • \(c\)

    • There are no outgoing edges and has at least one incoming edge.

  • \(e\)

    • There are no incoming edges and has at least one outgoing edge.

Operation: Dead End Contraction

The dead end contraction will stop until there are no more dead end nodes. For example from the following graph where \(w\) is the dead end node:

digraph G {
    u, v [shape=circle;style=filled;width=.4;color=deepskyblue];
    w [style=filled; color=green];
    "G" [shape=tripleoctagon;style=filled;
    color=deepskyblue; label = "Rest of the Graph"];

    rankdir=LR;
    G -> u [dir=none, weight=1, penwidth=3];
    u -> v -> w;
}

After contracting \(w\), node \(v\) is now a dead end node and is contracted:

digraph G {
    u [shape=circle;style=filled;width=.4;color=deepskyblue];
    v [style=filled; color=green, label="v{w}"];
    "G" [shape=tripleoctagon;style=filled;
        color=deepskyblue; label = "Rest of the Graph"];

    rankdir=LR;
    G -> u [dir=none, weight=1, penwidth=3];
    u -> v;
}

After contracting \(v\), stop. Node \(u\) has the information of nodes that were contrcted.

digraph G {
    u [style=filled; color=green, label="u{v,w}"];
    "G" [shape=tripleoctagon;style=filled;
         color=deepskyblue; label = "Rest of the Graph"];

    rankdir=LR;
    G -> u [dir=none, weight=1, penwidth=3];
}

Node \(u\) has the information of nodes that were contracted.

Linear contraction

In the algorithm, linear contraction is represented by 2.

Linear

In case of an undirected graph, a node is considered a linear node when

  • The number of adjacent vertices is 2.

In case of a directed graph, a node is considered a linear node when

  • The number of adjacent vertices is 2.

  • Linearity is symmetrical

Linear vertex on undirected graph

  • The green nodes are linear nodes

  • The blue nodes have an unlimited number of incoming and outgoing edges.

Undirected

graph G {
    u, w [shape=circle;style=filled;width=.4;color=deepskyblue];
    v [style=filled; color=green];
    G [shape=tripleoctagon;width=1.5;style=filled;
       color=deepskyblue;label = "Rest of the Graph"];

    rankdir=LR;
    w -- G -- u [dir=none, weight=1, penwidth=3];
    u -- v -- w;
}

Node

Adjecent nodes

Number of adjacent nodes

\(v\)

\(\{u, w\}\)

2

Linear vertex on directed graph

  • The green nodes are linear nodes

  • The blue nodes have an unlimited number of incoming and outgoing edges.

  • The white node is not linear because the linearity is not symetrical.

    • It is possible to go \(y \rightarrow c \rightarrow z\)

    • It’s not possible to go \(z \rightarrow c \rightarrow y\)

digraph G {
    u, v, w, x, y, z [shape=circle;style=filled;width=.4;color=deepskyblue];
    a, b [style=filled; color=green];
    G [shape=tripleoctagon;width=1.5;style=filled;
      color=deepskyblue;label = "Rest of the Graph"];

    rankdir=LR;
    {u, v} -> G -> {x, w, y, z} [dir=none, weight=1, penwidth=3];
    u -> a -> v;
    w -> b -> x;
    x -> b -> w [color=darkgray];
    y -> c -> z -> c;
}

Node

Adjecent nodes

Number of adjacent nodes

Is symmetrical?

\(a\)

\(\{u, v\}\)

2

yes

\(b\)

\(\{w, x\}\)

2

yes

\(c\)

\(\{y, z\}\)

2

no

Operation: Linear Contraction

The linear contraction will stop when there are no more linear nodes. For example from the following graph where \(v\) and \(w\) are linear nodes:

digraph G {
    u, z [shape=circle;style=filled;color=deepskyblue];
    v, w [style=filled; color=green];
    "G" [shape=tripleoctagon; style=filled;
         color=deepskyblue;label = "Rest of the Graph"];

    rankdir=LR;
    G -> {u, z} [dir=none, weight=1, penwidth=3];
    u -> v -> w -> z;
}

Contracting \(w\),

  • The vertex \(w\) is removed from the graph

  • The edges \(v \rightarrow w\) and \(w \rightarrow z\) are removed from the graph.

  • A new edge \(v \rightarrow z\) is inserted represented with red color.

digraph G {
    u, z [shape=circle;style=filled;color=deepskyblue];
    v [style=filled; color=green];
    "G" [shape=tripleoctagon; style=filled;
         color=deepskyblue;label = "Rest of the Graph"];

    rankdir=LR;
    G -> {u, z} [dir=none, weight=1, penwidth=3];
    u -> v;
    v -> z [label="{w}";color=red]
}

Contracting \(v\):

  • The vertex \(v\) is removed from the graph

  • The edges \(u \rightarrow v\) and \(v \rightarrow z\) are removed from the graph.

  • A new edge \(u \rightarrow z\) is inserted represented with red color.

digraph G {
    u, z [shape=circle;style=filled;color=deepskyblue];
    "G" [shape=tripleoctagon; style=filled;
         color=deepskyblue;label = "Rest of the Graph"];

    rankdir=LR;
    G -> {u, z} [dir=none, weight=1, penwidth=3];
    u -> z [label="{v, w}";color=red]
}

Edge \(u \rightarrow z\) has the information of nodes that were contracted.

The cycle

Contracting a graph, can be done with more than one operation. The order of the operations affect the resulting contracted graph, after applying one operation, the set of vertices that can be contracted by another operation changes.

This implementation, cycles max_cycles times through operations_order .

<input>
do max_cycles times {
    for (operation in operations_order)
     { do operation }
}
<output>

Contracting sample data

In this section, building and using a contracted graph will be shown by example.

  • The Sample Data for an undirected graph is used

  • a dead end operation first followed by a linear operation.

Construction of the graph in the database

Original Data

The following query shows the original data involved in the contraction operation.

SELECT id, source, target, cost, reverse_cost
FROM edges ORDER BY id;
 id | source | target | cost | reverse_cost
----+--------+--------+------+--------------
  1 |      5 |      6 |    1 |            1
  2 |      6 |     10 |   -1 |            1
  3 |     10 |     15 |   -1 |            1
  4 |      6 |      7 |    1 |            1
  5 |     10 |     11 |    1 |           -1
  6 |      1 |      3 |    1 |            1
  7 |      3 |      7 |    1 |            1
  8 |      7 |     11 |    1 |            1
  9 |     11 |     16 |    1 |            1
 10 |      7 |      8 |    1 |            1
 11 |     11 |     12 |    1 |           -1
 12 |      8 |     12 |    1 |           -1
 13 |     12 |     17 |    1 |           -1
 14 |      8 |      9 |    1 |            1
 15 |     16 |     17 |    1 |            1
 16 |     15 |     16 |    1 |            1
 17 |      2 |      4 |    1 |            1
 18 |     13 |     14 |    1 |            1
(18 rows)

The original graph:

_images/Fig6-undirected.png

Contraction results

The results do not represent the contracted graph. They represent the changes done to the graph after applying the contraction algorithm.

Observe that vertices, for example, \(6\) do not appear in the results because it was not affected by the contraction algorithm.

SELECT * FROM pgr_contraction(
  'SELECT id, source, target, cost, reverse_cost FROM edges',
  array[1, 2], directed => false);
 type | id | contracted_vertices | source | target | cost
------+----+---------------------+--------+--------+------
 v    |  4 | {2}                 |     -1 |     -1 |   -1
 v    |  7 | {1,3}               |     -1 |     -1 |   -1
 v    | 14 | {13}                |     -1 |     -1 |   -1
 e    | -1 | {5,6}               |      7 |     10 |    2
 e    | -2 | {8,9}               |      7 |     12 |    2
 e    | -3 | {17}                |     12 |     16 |    2
 e    | -4 | {15}                |     10 |     16 |    2
(7 rows)

After doing the dead end contraction operation:

_images/undirected_sampledata_b.png

After doing the linear contraction operation to the graph above:

_images/undirected_sampledata_c.png

The process to create the contraction graph on the database:

Add additional columns

Adding extra columns to the edge_table and edge_table_vertices_pgr tables, where:

Column

Description

contracted_vertices

The vertices set belonging to the vertex/edge

is_contracted

On the vertex table

  • when true the vertex is contracted, its not part of the contracted graph.

  • when false the vertex is not contracted, its part of the contracted graph.

is_new

On the edge table

  • when true the edge was generated by the contraction algorithm. its part of the contracted graph.

  • when false the edge is an original edge, might be or not part of the contracted graph.

ALTER TABLE vertices ADD is_contracted BOOLEAN DEFAULT false;
ALTER TABLE
ALTER TABLE vertices ADD contracted_vertices BIGINT[];
ALTER TABLE
ALTER TABLE edges ADD is_new BOOLEAN DEFAULT false;
ALTER TABLE
ALTER TABLE edges ADD contracted_vertices BIGINT[];
ALTER TABLE

Store contraction information

Store the contraction results in a table

SELECT * INTO contraction_results
FROM pgr_contraction(
  'SELECT id, source, target, cost, reverse_cost FROM edges',
  array[1, 2], directed => false);
SELECT 7

The vertex table update

Use is_contracted column to indicate the vertices that are contracted.

UPDATE vertices
SET is_contracted = true
WHERE id IN (SELECT  unnest(contracted_vertices) FROM  contraction_results);
UPDATE 10

Fill contracted_vertices with the information from the results tha belong to the vertices.

UPDATE vertices
SET contracted_vertices = contraction_results.contracted_vertices
FROM contraction_results
WHERE type = 'v' AND vertices.id = contraction_results.id;
UPDATE 3

The modified vertices table:

SELECT id, contracted_vertices, is_contracted
FROM vertices
ORDER BY id;
 id | contracted_vertices | is_contracted
----+---------------------+---------------
  1 |                     | t
  2 |                     | t
  3 |                     | t
  4 | {2}                 | f
  5 |                     | t
  6 |                     | t
  7 | {1,3}               | f
  8 |                     | t
  9 |                     | t
 10 |                     | f
 11 |                     | f
 12 |                     | f
 13 |                     | t
 14 | {13}                | f
 15 |                     | t
 16 |                     | f
 17 |                     | t
(17 rows)

The edge table update

Insert the new edges generated by pgr_contraction.

INSERT INTO edges(source, target, cost, reverse_cost, contracted_vertices, is_new)
SELECT source, target, cost, -1, contracted_vertices, true
FROM contraction_results
WHERE type = 'e';
INSERT 0 4

The modified edge_table.

SELECT id, source, target, cost, reverse_cost, contracted_vertices, is_new
FROM edges
ORDER BY id;
 id | source | target | cost | reverse_cost | contracted_vertices | is_new
----+--------+--------+------+--------------+---------------------+--------
  1 |      5 |      6 |    1 |            1 |                     | f
  2 |      6 |     10 |   -1 |            1 |                     | f
  3 |     10 |     15 |   -1 |            1 |                     | f
  4 |      6 |      7 |    1 |            1 |                     | f
  5 |     10 |     11 |    1 |           -1 |                     | f
  6 |      1 |      3 |    1 |            1 |                     | f
  7 |      3 |      7 |    1 |            1 |                     | f
  8 |      7 |     11 |    1 |            1 |                     | f
  9 |     11 |     16 |    1 |            1 |                     | f
 10 |      7 |      8 |    1 |            1 |                     | f
 11 |     11 |     12 |    1 |           -1 |                     | f
 12 |      8 |     12 |    1 |           -1 |                     | f
 13 |     12 |     17 |    1 |           -1 |                     | f
 14 |      8 |      9 |    1 |            1 |                     | f
 15 |     16 |     17 |    1 |            1 |                     | f
 16 |     15 |     16 |    1 |            1 |                     | f
 17 |      2 |      4 |    1 |            1 |                     | f
 18 |     13 |     14 |    1 |            1 |                     | f
 19 |      7 |     10 |    2 |           -1 | {5,6}               | t
 20 |      7 |     12 |    2 |           -1 | {8,9}               | t
 21 |     12 |     16 |    2 |           -1 | {17}                | t
 22 |     10 |     16 |    2 |           -1 | {15}                | t
(22 rows)

The contracted graph

Vertices that belong to the contracted graph.

SELECT id
FROM vertices
WHERE is_contracted = false
ORDER BY id;
 id
----
  4
  7
 10
 11
 12
 14
 16
(7 rows)

Edges that belong to the contracted graph.

WITH
vertices_in_graph AS (
  SELECT id
  FROM vertices
  WHERE is_contracted = false
)
SELECT id, source, target, cost, reverse_cost, contracted_vertices
FROM edges
WHERE source IN (SELECT * FROM vertices_in_graph)
AND target IN (SELECT * FROM vertices_in_graph)
ORDER BY id;
 id | source | target | cost | reverse_cost | contracted_vertices
----+--------+--------+------+--------------+---------------------
  5 |     10 |     11 |    1 |           -1 |
  8 |      7 |     11 |    1 |            1 |
  9 |     11 |     16 |    1 |            1 |
 11 |     11 |     12 |    1 |           -1 |
 19 |      7 |     10 |    2 |           -1 | {5,6}
 20 |      7 |     12 |    2 |           -1 | {8,9}
 21 |     12 |     16 |    2 |           -1 | {17}
 22 |     10 |     16 |    2 |           -1 | {15}
(8 rows)

Contracted graph

_images/newgraph.png

Using the contracted graph

Using the contracted graph with pgr_dijkstra

There are three cases when calculating the shortest path between a given source and target in a contracted graph:

  • Case 1: Both source and target belong to the contracted graph.

  • Case 2: Source and/or target belong to an edge subgraph.

  • Case 3: Source and/or target belong to a vertex.

Case 1: Both source and target belong to the contracted graph.

Using the Edges that belong to the contracted graph. on lines 11 to 20.

 1CREATE OR REPLACE FUNCTION my_dijkstra(
 2  departure BIGINT, destination BIGINT,
 3  OUT seq INTEGER, OUT path_seq INTEGER,
 4  OUT start_vid BIGINT, OUT end_vid BIGINT,
 5  OUT node BIGINT, OUT edge BIGINT,
 6  OUT cost FLOAT, OUT agg_cost FLOAT)
 7RETURNS SETOF RECORD AS
 8$BODY$
 9SELECT * FROM pgr_dijkstra(
10  $$
11  WITH
12  vertices_in_graph AS (
13    SELECT id
14    FROM vertices
15    WHERE is_contracted = false
16  )
17  SELECT id, source, target, cost, reverse_cost
18  FROM edges
19  WHERE source IN (SELECT * FROM vertices_in_graph)
20  AND target IN (SELECT * FROM vertices_in_graph)
21  $$,
22  departure, destination, false);
23$BODY$
24LANGUAGE SQL VOLATILE;
25CREATE FUNCTION

Case 1

When both source and target belong to the contracted graph, a path is found.

SELECT * FROM my_dijkstra(10, 12);
 seq | path_seq | start_vid | end_vid | node | edge | cost | agg_cost
-----+----------+-----------+---------+------+------+------+----------
   1 |        1 |        10 |      12 |   10 |    5 |    1 |        0
   2 |        2 |        10 |      12 |   11 |   11 |    1 |        1
   3 |        3 |        10 |      12 |   12 |   -1 |    0 |        2
(3 rows)

Case 2

When source and/or target belong to an edge subgraph then a path is not found.

In this case, the contracted graph do not have an edge connecting with node \(4\).

SELECT * FROM my_dijkstra(15, 12);
 seq | path_seq | start_vid | end_vid | node | edge | cost | agg_cost
-----+----------+-----------+---------+------+------+------+----------
(0 rows)

Case 3

When source and/or target belong to a vertex then a path is not found.

In this case, the contracted graph do not have an edge connecting with node \(7\) and of node \(4\) of the second case.

SELECT * FROM my_dijkstra(15, 1);
 seq | path_seq | start_vid | end_vid | node | edge | cost | agg_cost
-----+----------+-----------+---------+------+------+------+----------
(0 rows)

Case 2: Source and/or target belong to an edge subgraph.

Refining the above function to include nodes that belong to an edge.

  • The vertices that need to be expanded are calculated on lines 11 to 17.

  • Adding to the contracted graph that additional section on lines 26 to 28.

 1CREATE OR REPLACE FUNCTION my_dijkstra(
 2  departure BIGINT, destination BIGINT,
 3  OUT seq INTEGER, OUT path_seq INTEGER,
 4  OUT start_vid BIGINT, OUT end_vid BIGINT,
 5  OUT node BIGINT, OUT edge BIGINT,
 6  OUT cost FLOAT, OUT agg_cost FLOAT)
 7RETURNS SETOF RECORD AS
 8$BODY$
 9SELECT * FROM pgr_dijkstra(
10  $$
11  WITH
12  edges_to_expand AS (
13    SELECT id
14    FROM edges
15    WHERE ARRAY[$$ || departure || $$]::BIGINT[] <@ contracted_vertices
16    OR ARRAY[$$ || destination || $$]::BIGINT[] <@ contracted_vertices
17  ),
18
19  vertices_in_graph AS (
20    SELECT id
21    FROM vertices
22    WHERE is_contracted = false
23
24    UNION
25
26    SELECT unnest(contracted_vertices)
27    FROM edges
28    WHERE id IN (SELECT id FROM edges_to_expand)
29  )
30
31  SELECT id, source, target, cost, reverse_cost
32  FROM edges
33  WHERE source IN (SELECT * FROM vertices_in_graph)
34  AND target IN (SELECT * FROM vertices_in_graph)
35  $$,
36  departure, destination, false);
37$BODY$
38LANGUAGE SQL VOLATILE;
39CREATE FUNCTION

Case 1

When both source and target belong to the contracted graph, a path is found.

SELECT * FROM my_dijkstra(10, 12);
 seq | path_seq | start_vid | end_vid | node | edge | cost | agg_cost
-----+----------+-----------+---------+------+------+------+----------
   1 |        1 |        10 |      12 |   10 |    5 |    1 |        0
   2 |        2 |        10 |      12 |   11 |   11 |    1 |        1
   3 |        3 |        10 |      12 |   12 |   -1 |    0 |        2
(3 rows)

Case 2

When source and/or target belong to an edge subgraph, now, a path is found.

The routing graph now has an edge connecting with node \(4\).

SELECT * FROM my_dijkstra(15, 12);
 seq | path_seq | start_vid | end_vid | node | edge | cost | agg_cost
-----+----------+-----------+---------+------+------+------+----------
   1 |        1 |        15 |      12 |   15 |   16 |    1 |        0
   2 |        2 |        15 |      12 |   16 |   21 |    2 |        1
   3 |        3 |        15 |      12 |   12 |   -1 |    0 |        3
(3 rows)

Case 3

When source and/or target belong to a vertex then a path is not found.

In this case, the contracted graph do not have an edge connecting with node \(7\).

SELECT * FROM my_dijkstra(15, 1);
 seq | path_seq | start_vid | end_vid | node | edge | cost | agg_cost
-----+----------+-----------+---------+------+------+------+----------
(0 rows)

Case 3: Source and/or target belong to a vertex.

Refining the above function to include nodes that belong to an edge.

  • The vertices that need to be expanded are calculated on lines 19 to 24.

  • Adding to the contracted graph that additional section on lines 38 to 40.

 1CREATE OR REPLACE FUNCTION my_dijkstra(
 2  departure BIGINT, destination BIGINT,
 3  OUT seq INTEGER, OUT path_seq INTEGER,
 4  OUT start_vid BIGINT, OUT end_vid BIGINT,
 5  OUT node BIGINT, OUT edge BIGINT,
 6  OUT cost FLOAT, OUT agg_cost FLOAT)
 7RETURNS SETOF RECORD AS
 8$BODY$
 9SELECT * FROM pgr_dijkstra(
10  $$
11  WITH
12  edges_to_expand AS (
13    SELECT id
14    FROM edges
15    WHERE ARRAY[$$ || departure || $$]::BIGINT[] <@ contracted_vertices
16    OR ARRAY[$$ || destination || $$]::BIGINT[] <@ contracted_vertices
17  ),
18
19  vertices_to_expand AS (
20    SELECT id
21    FROM vertices
22    WHERE ARRAY[$$ || departure || $$]::BIGINT[] <@ contracted_vertices
23    OR ARRAY[$$ || destination || $$]::BIGINT[] <@ contracted_vertices
24  ),
25
26  vertices_in_graph AS (
27    SELECT id
28    FROM vertices
29    WHERE is_contracted = false
30
31    UNION
32
33    SELECT unnest(contracted_vertices)
34    FROM edges
35    WHERE id IN (SELECT id FROM edges_to_expand)
36
37    UNION
38
39    SELECT unnest(contracted_vertices)
40    FROM vertices
41    WHERE id IN (SELECT id FROM vertices_to_expand)
42  )
43
44  SELECT id, source, target, cost, reverse_cost
45  FROM edges
46  WHERE source IN (SELECT * FROM vertices_in_graph)
47  AND target IN (SELECT * FROM vertices_in_graph)
48  $$,
49  departure, destination, false);
50$BODY$
51LANGUAGE SQL VOLATILE;
52CREATE FUNCTION

Case 1

When both source and target belong to the contracted graph, a path is found.

SELECT * FROM my_dijkstra(10, 12);
 seq | path_seq | start_vid | end_vid | node | edge | cost | agg_cost
-----+----------+-----------+---------+------+------+------+----------
   1 |        1 |        10 |      12 |   10 |    5 |    1 |        0
   2 |        2 |        10 |      12 |   11 |   11 |    1 |        1
   3 |        3 |        10 |      12 |   12 |   -1 |    0 |        2
(3 rows)

Case 2

The code change do not affect this case so when source and/or target belong to an edge subgraph, a path is still found.

SELECT * FROM my_dijkstra(15, 12);
 seq | path_seq | start_vid | end_vid | node | edge | cost | agg_cost
-----+----------+-----------+---------+------+------+------+----------
   1 |        1 |        15 |      12 |   15 |   16 |    1 |        0
   2 |        2 |        15 |      12 |   16 |   21 |    2 |        1
   3 |        3 |        15 |      12 |   12 |   -1 |    0 |        3
(3 rows)

Case 3

When source and/or target belong to a vertex, now, a path is found.

Now, the routing graph has an edge connecting with node \(7\).

SELECT * FROM my_dijkstra(15, 1);
 seq | path_seq | start_vid | end_vid | node | edge | cost | agg_cost
-----+----------+-----------+---------+------+------+------+----------
   1 |        1 |        15 |       1 |   15 |    3 |    1 |        0
   2 |        2 |        15 |       1 |   10 |   19 |    2 |        1
   3 |        3 |        15 |       1 |    7 |    7 |    1 |        3
   4 |        4 |        15 |       1 |    3 |    6 |    1 |        4
   5 |        5 |        15 |       1 |    1 |   -1 |    0 |        5
(5 rows)

See Also

Indices and tables